樱桃在线观看Since 1991 we have been supplying the world with test and measurement equipment. At Pico we realize that your choice of test accessories can be almost as important as your choice of test equipment. Here you can purchase a variety of test and measurement accessories quickly and securely online.
The AD2201 is a 200 MHz bandwidth active differential probe suitable for high-speed measurement applications, with a differential measurement range of ±20 V and a common-mode range of up to ±60 V (DC + peak AC).
This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making differential voltage measurements. Applications include making safe measurements in power circuit applications and acquisition of high-speed balanced differential signals found in serial communications buses such as BroadR-Reach (see application note).
樱桃在线观看Recently redesigned, the AD2201 replaces the TA045 with the same performance specifications, but with improved powering options. This probe now includes an in-line battery module, with a 5 V USB power lead integrated for use with standard off-the-shelf USB chargers.
樱桃在线观看The kit includes the following items:
|Title||Language||Issue||Size||Updated||All products||All languages||All documents||Status|
|AD2201 200 MHz 60 V Differential Probe User’s Guide||English||1||578 KB||Sep 01 2020||English||open|
|AD2201 and AD2801 EU Declaration of Conformity||English||1||1 MB||Sep 17 2020||English||open|
|AD2201 differential oscilloscope probe specifications|
|Bandwidth||DC to 200 MHz (–3 dB)|
|Rise time||1.75 ns|
|Input impedance||500 kΩ ∥ 7 pF each side to ground|
|Differential range||±20 V|
|Common mode range||±60 V|
|Absolute max. voltage
(either input to ground)
|Swing (into 50 kΩ load)||±2 V|
|Offset (typical)||< ±2 mV|
|Noise (typical)||0.3 mV RMS|
|Source Impedance (typical)||50 Ω|
|CMRR (typical)||80 dB at 100 Hz; 50 dB at 10 MHz|
|Ambient operating temperature||–10 to +40 °C|
|Ambient storage temperature||–30 to +70 °C|
|USB power lead||5 V DC 300 mA|
|Battery||9 V (PP3, 6LR61)|
|Mains adaptor(s)||5 V DC 300 mA or 9 V DC 200 mA|
|Length of input leads||50 cm|
|Length of BNC lead||125 cm|
|Dimension (LxWxH)||111 mm x 22 mm x 14 mm|
|Compliance||Designed and tested in accordance with the European standard publication EN 61010-031:2015 (Safety requirements for hand-held probe assemblies for electrical measurement and test)|